With its traditional boarded vertical panel design, this external rustic style pine door or gate by XL Joinery has braces stapled from the face in arrowhead formation, allowing the door to be hung either left or right-handed.
Features & Benefits: XL Joinery Ledged & Braced Shed Door/Wooden Gate
- Boarded, ledged and braced
- Ready for home finishing
- Softwood Pine
- Natural colour
- FSC Certified
- Traditional boarded vertical panel design
- Braces stapled from the face in arrowhead formation enabling the door to be hung in either a left or right handed configuration
- All braces fixed in place with staples
- Solid untreated softwood requires sealing and painting
- Staple holes will need filling prior to decoration
- Available in a range of sizes (27″-36″)
- Manufactured to a high standard
Finish
This wooden door/gate is supplied unfinished, ready to paint or stain in a finish that will complement the rest of your property.
Technical Information
- Not recommended for use externally where exposed to central heating on the inside.It is essential these doors are thoroughly painted prior to exposure to the weather in accordance with our door care advice. Face knots should be sealed prior to painting to prevent resin bleed, which can result where exposed to ultra violet light. Screw or staple holes will need filling prior to decoration.Must be installed and sealed in accordance with our “Door Care and Maintenance Advice” which comes supplied with each door.It is never advisable or intended that timber external doors be fully exposed to the worst elements of the weather, even if well coated. A southerly or south-westerly elevation is the worst direction for prevailing weather and exposure to the hottest sun can seriously degrade external doors.We recommend these are set back from the front face of the building or covered by a canopy.Always fit with a suitable weatherboard regardless of frame cill type fitted to prevent droplets of moisture hanging from the door bottom.We recommend washing down with warm water and detergent every two to three years and re-coating in order to retain good appearance.
Storage
- When receiving a door, it should be laid flat, fully supported off the floor in a cool, dry and fully ventilated area with protective packaging complete.
Product Specification
- Door Thickness: 16mm (boarded panels), 38mm (boarded panels including ledging)
- Weight: 33kg
- Glazing: No Glazing
- Finish: Unfinished
- Colour: Natural
- Door Handing: Left or Right Handed
- Core: Boarded Ledged and Braced
- Material: Softwood
- Material: Pine
- Trim Tolerance – Top: 12mm
- Trim Tolerance – Bottom: 12mm
- Trim Tolerance – Sides: 12mm
Standards & Certification
- Manufactured from FSC Certified Wood: The Forest Stewardship Council is an independent organisation that supports the responsible management of forests worldwide.
Please note:
- These doors are not recommended for use internally.
- Must be installed and sealed in accordance with manufacturers advise which comes supplied with each door.
- Not recommended for use externally where exposed to central heating on the inside.
Dimensions
1981mm
2032mm
Door Thickness
44mm
Door Width
686mm
762mm
813mm
838mm
915mm
Size
1981mm x 686mm (78×27 inch)
1981mm x 762mm (78×30 inch)
1981mm x 838mm (78×33 inch)
1981mm x 915mm (78×36 inch)
2032mm x 813mm (80×32 inch)
Details
Unfinished
Colour
Brown
Door Handing
Left or Right Handed
Door Type
Ledged & Braced
Wooden Gate
Pine
Glazing
Unglazed
Weight
29kg
30kg
31kg
33kg
35kg
Door Location
External
Trim Tolerance – Top
12mm
12mm
Trim Tolerance – Sides
12mm














Reviews
There are no reviews yet.